Specialized in manufacturing T-shirts for 21 years

katy perry cupcake costume (child\'s)

by:Teesso     2019-10-25
My daughter likes Katie Perry. Worships her.
Just listen to her.
It was because of this degree of eternal love that I decided to dress for her.
This will be brilliant.
In my opinion, Katie Perry\'s cupcake tower gown is one of her coolest outfits. So. . .
I am trying to copy it for a 4 year old.
Cupcakes, or the fake cups I call them, may be the most interesting part of the project.
Before starting, lay the padding on the ring to test the spacing and see how many pads are needed for each size.
Divide the numbers into two halves, which is how much table tennis or decorations you need to cut.
First of all, go out with your cutting tool and your decorative box and table tennis because it will be messy and it will most likely smell very bad.
Use the cutting wheel attachment on Dremel (if using)
Cut off the plastic top of the ornament, then cut the entire ornament in half to form two hemisphere.
Then continue to cut the table tennis in half. (
Please note: dust and other debris are flying in the air.
Please take care to protect your eyes and nose. )
When it\'s done, take them in and give them a good paint job.
I made 1/3 Brown (chocolate), 1/3 pink (strawberry)
And 1/3 white (vanilla).
Once dry, stick them on the cupcake pad.
Your next step is to mix \"frost\" and pipe it to the top of the Cup.
I followed this tutorial on YouTube to mix the Frost: The steps are the same, but since I want to do all kinds of Frost colors (
Can\'t Feel the mix of six different batches)
I chose to make a normal, no color batch and paint it after it hardened.
If you top a cup with anything (
Gems, berries, etc)
Before it\'s completely hardened, it\'s a good time to add these.
The cupfakes will be month-
Treat them for 24 hours, so once they get hard it\'s time to color themrific.
Select the color you plan to use.
You can use any bright, lively, happy color you want.
Now is a good time for you and bad yourself to be crazy.
Continue to paint \"frost\" with any color you want \". Go wild.
You can also go back and add glitter to the icing if you want.
I chose to draw another layer on it and before it dries, shake the flash frantically on top of the wet paint (
Note to match the flash color with the paint color as much as possible. )
I also recommend performing this part anywhere you don\'t mind the flash.
We all know that there has been a way for glitter for years to let people know that it exists.
You can also go back and add some \"sauce\" or something to the top of the icing.
I just took a few of my bottles of paint and poured some down the bottom of the heart of the gem, so it ran down.
Allow to dry and add any other decorations you want.
Now that the interesting part is over, it\'s now the \"interesting\" part.
Assemble the skirt seat.
You can do it in a simpler way, or you can do it the way I do it.
I will provide instructions for both methods.
Both methods are the same: stick the ring together in pairs.
In other words, stick the two big rings together, and then stick the two small rings together.
I would suggest using the E6000 or something like that in this section.
It works very fast and it works very well.
The next step is to cut the white fabric to suit the various forms.
Okay, cotton T-
The shirt is very tolerant and very easy to stretch and pull into the position.
An easy way is to place the ring inside the shirt, spread the bottom of the shirt around the larger ring, and then cut off the top of the shirt.
This creates a fabric ring that can be used to pull and stitch.
For the smaller set of rings, do this again.
After that, there are two ways to go ahead and assemble the skirt seat, which I will discuss in two steps.
Now that you \'ve cut your fabric into shape, it\'s time to start adding and sewing them together on the ribbon.
This method works better for those with sewing machines.
Manual sewing is also possible, although method 2 may be better.
Bring your bigger ring with cloth around it.
Mark the area where there will be ribbon, then pull the fabric back.
Go ahead and start sewing the ribbon on the fabric and make sure the ribbon pleats so you can loosen it.
There is a purple ribbon at the bottom of the skirt, and then the rest of the way is pink.
I put a line of purple satin ribbons and then 1-
2 rows of purple yarn.
I then went on with a row of pink ribbons, then a couple of rows of pink tulle, and then another row of pink ribbons.
In addition to being cheaper than regular ribbons, tulle was added for extra volume.
The wire shaft of the tulle is much more bandwidth than the wire, so in order to get the wire shaft of the same size, fold it in half, look at the length, and then start sewing.
Once the ribbon is in place, you can sew the white fabric in place.
Stretch it on the ring, then simply sew the seam along the inside with a whip.
No matter what it looks like, no one will see it.
Take the smaller ring, stretch the fabric to a pair and mark it along the edge of the inner ring.
This is for the belt.
Continue to sew pink ribbons along the waist to create a pink belt.
I added in and sewn two extra fabric tails tied to the bow at the back, but this is not necessary.
The fabric is then stitched in place with a whip to make a sealed finished product.
To connect the two rings together, simply take another shot along the inner circle of the larger pair and attach it to the outer circle of the smaller pair.
You should be like this in the end.
The method 2 of the skirt base is different from Method 1 and may be more suitable for manual sewing.
Remember, though, sewing this by hand. as I did)
It takes quite a while, so don\'t get frustrated if you feel slow.
First, remove the ring, stretch the fabric of each pair of clothes to the top, and then sew it in place with a whip.
It doesn\'t matter if it doesn\'t look good, no one will see it.
Start at the bottom and start sewing the ribbon and tulle in place to make sure to pleat as you go so you can loosen it.
There is a purple ribbon at the bottom of the skirt, and then the rest of the way is pink.
I put a line of purple satin ribbons and then 1-
2 rows of purple yarn.
I then went on with a row of pink ribbons, then a couple of rows of pink tulle, and then another row of pink ribbons.
In addition to being cheaper than regular ribbons, tulle was added for extra volume.
The wire shaft of the tulle is much more bandwidth than the wire, so in order to get the wire shaft of the same size, fold it in half, look at the length, and then start sewing.
Then, go to the top of the skirt.
Sew on the belt (a doubled-
Fast Rise seam fine workmanship).
Feel free to add extra ribbon tails to create ties.
These can be used to add bows to the back of the skirt.
However, this step is not necessary.
Once all the ribbons are added, the whip stitch the two layers together along the inside.
It should be like this in the end.
Now that the skirt base is almost finished, no matter which method you choose, it\'s time to finish it.
Although the skirt is made of as light material as possible, it can still be heavy.
Especially if the wearer\'s waist is much smaller than the innermost part of the skirt.
To offset this, you can sew two elastic straps on the skirt as a sling and lift the skirt up without causing unnecessary frustration to the wearer.
The sling is made under the top and cannot be seen by the naked eye.
To do this, just cut off the elastic band and sew one end of each elastic band along the top to the inside of the skirt.
Install it on the wearer to test the elasticity, see how much stretch is generated when worn, mark the position of the sewing, and then stitch the other end in place.
After completion, the rest is to remove the ribbon and glue the cupcake in place with E6000 (or similar)
Wait until it dries.
Congrats, your dress is fake!
The top of this garment can be made in two different ways.
You can make the whole thing from scratch or you can use some pre-
Assemble components to speed up the process.
From scratch, first sew a tank top together.
Patterns can be found online or in craft shops, so find the pattern you like and run with it.
Sew on the collar of the folded edge with sequins and rhinestones attached.
Sparks can be attached by sewing on top or using glue, so you can use whatever you like.
If you want to save some time, you can use the tank top purchased by a store and add extra parts and bobs in the same way.
Sew on the folds and attach sparkling parts.
Similarly, sewing machines may be best suited for this situation, but manual sewing is also feasible if time consuming.
The last step is the simplest. . .
Put on her shiny outfit to decorate your minion and take to the streets! Step 1 -Put on skirt. Step 2 -
Wear a coat and a wig. Step 3 -? Step 4 -PROFIT (
I highly recommend wearing some leggings or tights under the skirt.
If your child is the same as my child, by the end of the evening she will be eager to climb out of the costume and sit down before you go home. )
Collectively, the effect of polo wear for men on industrial society has been to eliminate and drastically reduce the time long associated with .
You will find a wide variety of for sale for virtually any needs. Keep in mind how you plan to use the , and talk with a professional about the model and features that are right for your application. Go to Global Weiye Clothing for on sale.
The engineers and developers of Shenzhen Global Weiye Clothing Co., Ltd. are the best in their own professional way and we guarantee to provide related service to our dear customers.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...
在线客服